PGA Series are all-polypropylene filter cartridges made with submicron fine fiber filter media which provide smaller pores. It is fabricated without using any binders, adhesives, plasticizers, and surfactants. PGA filters can be repeatedly hot water sanitized. The filter media and its support structure are thermally welded to the end caps, making integral filter cartridges of minimum extractables in a wide range of fluids and applications. All the filter cartridges are manufactured in a clean room environment.
Features |
Nominal rated structure, particle removal rating from 0.1 to 50 Micron Non filber shedding 100% polypropylene components provide broad chemical compatibility, suitable for use in a variety of fluids Various end cap configurations to fit into the most standard housings Meet FDA requirements for food contact and passes European Commission Directives (EU10/2011) |
Applications |
Pharmacitical Water RO Pre-Filtration Fine Chemicals Process Water |
Filtration Area |
| Ø 69mm： | 0.4 - 0.7 m² / 10” Filter Cartridges |
Material of Constructions |
| Media： | PP |
| Support： | PP |
| Cage / Core / End cap： | PP |
| Connection： | PP |
| Sealing： | Silicone EPDM NBR Viton® |
Performance |
| Max. Operating temperature： | 80℃ |
| Max. Operating DP： | 4 bar@ 21℃ , 2.4 bar@ 80℃ |
 |
| Particle Removal Efficiency |
| Cartridge Designation | 90% Efficiency | 95% Efficiency |
| PGA0010 | 0.1μm | —— |
| PGA0022 | 0.22μm | —— |
| PGA0045 | 0.45μm | —— |
| PGA0100 | 1μm | —— |
| PGA0300 | 3μm | 5μm |
| PGA0500 | 5μm | 10μm |
| PGA1000 | 10μm | 15μm |
Food Contact Compliance |
Materials of construction comply with FDA regulationsfor food and beverage contact use as detailed in theUS Code of Federal Regulations 21CFR. Materials used to produce filter media and hardwaremeet the specifications for biological safety per USPCalss VI-121C for plastics. Filter cartridges passed European CommissionDirectives (EU10/2011) Halal Certified |
Ordering Information |
|
