OF Series Pleated Filter Cartridge is manufactured to exact standards and are used for filtration of oilfield fluids and its fully thermal welded construction ensures safe operation and optimum filtration performance. Its media has a fixed pore construction of high quality fibers while providing combination of surface and depth filtration. The high performance 3-layers glass fibre/PET media provide the unique combination of high flow rate, high dirt load capacity, large surface area at absolute rating of beta 5000 (99.98% removal). The fully thermal welded construction ensures safe usage in filtration with high temperature fluids, acids, diesel, oily water and solvents. The advantage is smaller filter vessels, less footprint and lower capitical investments. OF series are manufactured with a rigid outer cage ideally suited for use in harsh oilfield environments and available in a wide range of microns suitable for the protection of oilfield formations.
Features |
Large filter area and depth filtration provides a longlife time of pleated filter cartridge Fully thermally welded,no glue or adhesives Beta5000(efficiency 99.98%) for Glass fiber media Low cost because of large filter area and reduces labor costs to change Three layers construction:Glass fiber media with PET support layer for maximum removal performance,strength and stability The higher strength of outer hard cage
|
Applications |
Completion fluids Work over fluids Gravel pack fluids Waste water Diesel, fuel & oil Surface water intake Polishing brines Gels, amines & glycols Process water Pre filtration RO Stimulation fluids Acids
|
Dimensions |
| Outer Diameter | 64mm |
| Inner Diameter | 28mm |
| Length | 30 ”，40 ” |
Material of Constructions |
| Media | PP , PET , Glass Fiber |
| End Cap Material | PP |
| Center Core | PP |
| Outer Cage | PP |
| Sealing | Silicone, EPDM, NBR, Viton® |
| End Cap Types | 222/Flat End |
Performance |
| Operating Pressure and temperature: | The pleated cartridge construction withstand differentia Pressures up to 60 PSI(4Bar) at ambient temperature The optimum changeout differential pressure is 35psi(2.5Bar) up to 52°C |
| Service condition: | 500KPa(5Bar)by 20°C 300KPa(3Bar)by 65°C |
| Beta: | 5000(99.98% removal efficiency) for glass fiber media |
| Construction: | Fully thermal welded |
 |
Quality |
| Manufacturered according to ISO9001:2015 certified Quality Management System |
Ordering Information |
|
